Red Dot Model R-1200 No-Idle Air Conditioner Unit
The Red Dot Model R-1200 & R-1205 No Idle A/C Red Dot’s battery-powered A/C is designed for all makes of commercial trucks and tractors. There’s no better way to maintain a cool, comfortable cab and sleeper environment without the expense of idling, maintenance, or a complicated installation. Distributed and supported in North America by Red Dot, the R-1200 is engineered by Indel B, known worldwide for innovative refrigeration and A/C systems.
TRUCK SLEEPERS
The R-1200 No-Idle Air Conditioning system is designed for rubber-tired, over the-road applications. It will maintain a cool, comfortable sleeper environment while the truck engine is turned off, even in hottest and most humid climates. The system requires four dedicated Group 31 deep cycle AGM batteries and provides ten hours of cool comfortable sleeper A/C.
Specifications:
● Compressor: Two Danfoss Compressors
● Refrigerant: R-134a
● Voltage: 12 / 24 volt Direct Current
● Cooling Capacity*: Up to 1800 Watt / 6150 BTU
● 12V Consumption: 75 Amps/Hour (maximum), 37 Amps/Hour (minimum)
● Fan Speed/Power: 3-Speed (265 CFM)
● Battery Protection: Standard
● Dimensions & Weight:
◊ Condensing unit: 12”H x 28 9/16”W x 4 1/8”D – 15.8 lbs
◊ Evaporating unit: 5 5/16”H x 15 3/16”W x 13”D – 11.7 lbs.
◊ Compressor/control unit: 8”H x 15”W x 15 1/2”D – 54.5 lbs. TOTAL: 82 lbs.
* figures taken with ambient temperature at 32°C / 89.6°F
Features: The R-1200 basic kit includes these three components with all hoses and fittings
● In Sleeper
Evaporator with Dual Blowers
◊ Mounts in the sleeper for flexible positioning and installation
◊ Dual high speed blower motors force cool air throughout the sleeper
◊ Digital control panel allows the driver to fine tune the comfort level
● Below Sleeper
Dual Compressor Unit
◊ Dual Danfoss compressors provide maximum BTU’s when needed
◊ 12/24 Volt DC operation voltage extends system run time
◊ Compact design fits nicely under the sleeper
● Back of Sleeper
Condenser with Dual Fans
◊ Lightweight and low profile allow flexible positioning and installation
◊ Dual 12” fans offer efficient condenser operation in hot environments
◊ Rugged Stainless Steel frame provides long life and product appeal
Options:
● Smart Battery Isolator
RD-5-13056-0P
◊ Reduces charging system workload by not connecting the auxiliary batteries until the starting batteries are charged to 13.2V.
◊ Allows bi-directional charging from alternator or from shore power charger/converter
when available.
◊ Simple installation -Connect to starting battery, auxiliary battery, and ground.
● Trojan Absorbed Glass Mat (AGM) Battery
RD-5-13055-0P (four pack)
◊ Designed specifically for cycling truck applications/auxiliary A/C systems
◊ Excellent recharge efficiency while driving
◊ 30 month warranty
● Converter / Battery Charger
RD-5-13054-0P
115 Volt AC to 12 Volt DC
◊ Allows system to run from shore power when available
◊ Recharges the auxiliary batteries to 90% in 2-3 hours
◊ Specifically designed for Group 31 deep cycle AGM batteries