The MASTER-CHILL™ MCR-33 Series Roll-In & Pass-Thru Blast Chillers
FEATURES:
● Available in two sizes (for single or double pan rack) as either roll-in or pass-thru
● Flush mounted door with 36-inch high kickplate on exterior
● Matching refrigeration system sized for pull down time required
● Surface mounted control panel with HACCP-compliant recording features
● Four food temperature probes with sequential readout display in MCR-33-101, eight probes in MCR-33-102

CONSTRUCTION:
● Stainless steel interior and exterior with polyurethane foamed-in-place insulation
● Interior light
● Door gasket heater
● High velocity forced air convection through evaporator coil
● HACCP compliant recording thermometer for blast chiller ambient air temperature (requires printer to have record)
● 4 food temperature probes with sequential readout display in MCR-33-101, 8 probes in MCR-33-102
● Automatic chill cycle control with food temperature probes

DOORS:
● Door dimensions: 30″ x 78″
● Flush mounted
● 36″ high 16 ga. stainless steel kick-plate on door exterior

CONTROL PANEL:
● HACCP compliant recording features
● Surface mounted on exterior of blast chiller
● On/off switch
● Digital readout of interior ambient temperature
● Digital cycle timer
● Microprocessor control system enclosed in easily accessible box
● Automatic air defrost cycle
● Automatic hold cycle
● Audible alarm at end of chilling cycle

REFRIGERATION SYSTEM:
● An air- or water-cooled condensing unit will be supplied depending on application.

RACK:
● Racks provided:
◊ MCR-33-101 ………………………… 1
◊ MCR-33-102 ………………………… 2
● Stainless steel construction
● Accomodates 26 pans, 12″ x 20″ x 21/2″, two per each of 13 ledges
● Ledges on 41/2″ spacing
● Each pan holds up to 10 pounds of food for total rack quantity of 260 lbs.
● Rack dimensions: 241 /2″ wide x 27″ deep x 685 /16″ high
● Rack mounted on heavy-duty swivel casters

COOLING TIME
● Maximum load of 260 pounds of food requires approximately 90 minutes per cooling cycle depending on food density and input temperature of food

WARRANTY:
● Standard limited one year extended compressor (optional four year extended warranty available), one year limited parts, limited 10 year panel warranty

Available models for MASTER-CHILL™ MCR-33 Series Roll-In & Pass-Thru Blast Chillers-
1) ROLL-IN-MODELS: MCR-33-101 and MCR-33-102.
2) PASS-THRU MODELS: MCR-33-101PT and MCR-33-102PT.